所有產(chǎn)品分類
您的當(dāng)前位置：網(wǎng)站首頁 > 產(chǎn)品中心 > 日本OMRON歐姆龍
日本OMRON歐姆龍鏡柱F39-SML0990/F39-SML1310
Protective Bar
| Appearance | Model | Remarks |
|---|---|---|
| F39-PB[][][][] *1 | 2 Light Curtain brackets 4 mounting brackets 0 to 4 intermediate brackets for backside mounting (quantity required for the sensing width) 0 to 4 intermediate brackets for mounting to the sides (quantity required for the sensing width) |
| F39-PB[][][][]-S *1 *2 | 1 Light Curtain bracket 2 mounting brackets 0 to 2 intermediate brackets for backside mounting (quantity required for the sensing width) 0 to 2 intermediate brackets for mounting to the sides (quantity required for the sensing width) |
Note: The following are not provided with the Protective Bars.
? Safety Light Curtain
? Safety Light Curtain Top/Bottom Brackets
? Wall Mounting Screw Unit
*1. The same four digits indicating protective height that are used in the Sensor model number ([][][][]) are used in the
part of the Protector model number.
*2. Purchase the F39-PB[][][][] (which contains two sets of brackets) to use Protective Bars for both the Emitter and
Receiver.
Test rod (Sold separately)
| Diameter | Model |
|---|---|
| 14mm dia. | F39-TRD14 |
| 20mm dia. | F39-TRD20 |
| 25mm dia. | F39-TRD25 |
| 30mm dia. | F39-TRD30 |
Mirror Column
| Appearance | Applicable light curtain | Column height | Model |
|---|---|---|---|
| F3SJ Series Safety Light Curtain | |||
15% shorter than the rating) | Protective height up to 0880 | 990 mm | F39-SML0990 |
| Protective height up to 1200 | 1,310 mm | F39-SML1310 | |
| Protective height up to 1520 | 1,630 mm | F39-SML1630 | |
| Protective height up to 1840 | 1,950 mm | F39-SML1950 |
Sensor Mounting Bracket (Sold separately)
| Appearance | Specifications | Model | Application | Remarks |
|---|---|---|---|---|
 | Top/bottom bracket | F39-LJB1 | Top/bottom bracket for F3SJ-E/B | 2 for an emitter, 2 for a receiver, total of 4 per set |
 | Intermediate bracket | F39-LJB2 *1 *2 | In combination use with top/bottom bracket for F3SJ-E/B Can be used as free-location bracket. | 1 set with 2 pieces |
 | One-touch bracket | F39-LJB3-M6 *1 | One-touch bracket for F3SJ-E/B Supports M6 slide nut for aluminum frame. | 1 set with 2 pieces |
| F39-LJB3-M8 *2 | One-touch bracket for F3SJ-E/B Supports M8 slide nut for aluminum frame. | |||
 | One-touch M6 bracket One-touch M8 bracket | F39-LJB3-M6K *1 | Bracket to mount an intermediate bracket to the aluminum frame with a single touch. | Hexagon socket head cap screws (M6 x 10) are included. |
| F39-LJB3-M8K *2 | Hexagon socket head cap screws (M8 x 14) are included. | |||
 | Compatible mounting bracket | F39-LJB4 | Mounting bracket used when replacing existing area sensors (F3SJ-A or F3SN) with the F3SJ-E/B. | 2 for an emitter, 2 for a receiver, total of 4 per set |
 | Contact mount bracket | F39-LJB5 | Bracket to closely contact the back side of the Sensor. | 2 for an emitter, 2 for a receiver, total of 4 per set |
Note: All the sensor mounting brackets for F3SJ-E are sold separately.
*1. Combining F39-LJB2 and F39-LJB3-M6K makes F39-LJB3-M6.
*2. Combining F39-LJB2 and F39-LJB3-M8K makes F39-LJB3-M8.
友情鏈接Link
