所有產品分類
您的當前位置：網站首頁 > 產品中心 > 日本CCS
日本CCS電源PD3-5024-4-SI(A)
日本CCS電源PD3-5024-4-SI(A)
This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 46 W.
Connection with the HLV3/HLV2-series Spot Lights is also available.
This Control Unit operates on a 100 to 240 VAC input and measures 197 x 82.6 x 120 mm (width x depth x height). External control through EIA-485 communications.
Product Details
Dimensions W 197 mm x D 82.6 mm x H 120 mm Applicable Light Unit (output ratings) Light Units with 24 VDC input, HLV3/HLV2 series (Spot Light)
Total for 4 channels: 46 WNumber of channels 4 channels Lighting method Constant/Strobe lighting Drive method 24V LIGHT connectors: Constant-voltage system,
HLV LIGHT connectors: Constant-current systemIntensity control method 24V LIGHT connectors: PWM control and lighting time control,
HLV LIGHT connectors: Variable-current controlPWM frequency 125kHz Input voltage 100 to 240 VAC (+10% -15%) Frequency 50/60 Hz Power consumption 70 VA Output voltage 24VDC Output current Total for 4 channels: 1.91 A Inrush current 15 A (at 100 VAC), 30 A (at 200 VAC) from a cold start Intensity control Manual: 256-step using the front setting switch
External: Command input via EIA-485 communicationError detection display Digital display on the front-panel;
OCP: Overcurrent error, EFN: Fan Stop Error,
and EID: ID error (HLV3/HLV2-series Spot Lights only)Error detection output Command sent when overcurrent output is detected. Over current protection Operates at 107% of rated output current or higher. Reset by pressing operation setting switch for at least 1 second or by cycling the power supply.
*Do not intentionally short-circuit the positive and negative output terminals.Output connector SMP-03V-BC x 8 External control connector Trigger input: MIL connector (MIL-C-83503 compliant), 10 pins
For setting the light intensity/mode: e-CON connector, 3 pinsConformed standards CE, UKCA、RoHS Operating temperature and humidity Temperature: 0 to 40°C, Humidity: 20 to 85%RH (no condensation) Storage temperature and humidity Temperature: -20 to 60°C, Humidity: 20 to 85%RH (no condensation) Cooling method Forced cooling Weight 1,200 g Material Aluminium, ABS Accessories 2m long 3-pin power cord with ground terminal x1
Base Brackets x1 set
Instruction Guide x1Program [Sample Program]
Sample programs are available. See the Options tab.
友情鏈接Link
